zeroPLC/zeroPLC-installer
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Update for Rev 0.2

Browse Source
This commit is contained in:
CarstenArend
2026-02-17 13:33:48 +01:00
parent 3214690434
commit 86832745dd
4 changed files with 6 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
README.md
View File

@@ -1,3 +1,4 @@
# zeroPLC installer
wget -q -O - https://git.sqegmbh.de/zeroPLC/zeroPLC-installer/raw/branch/master/install.sh | sudo bash
wget -q -O - https://git.sqegmbh.de/zeroPLC/zeroPLC-installer/raw/branch/master/install.sh | sudo bash
https://git.sqegmbh.de/.download/zeroPLC_image_20250909.zip

2
dtoverlay/mcp23017_0x20_zeroplc.dts
View File

@@ -92,7 +92,7 @@
mcp@20 {
compatible = "microchip,mcp23017";
reg = <0x20>;
gpio-line-names = "AIN1_SWITCH_I/V","AIN2_SWITCH_I/V","AIN3_SWITCH_I/V","AIN4_SWITCH_I/V","AIN5_SWITCH_I/V","AIN6_SWITCH_I/V","AIN7_SWITCH_I/V","AIN8_SWITCH_I/V","NC","IN7","IN8","DIS_24VOUT_POE","5V_EXT_FAULT","5V_EXT_EN","RS485_120R","DIS_24VOUTPUTS";
gpio-line-names = "AIN1_SWITCH_I/V","AIN2_SWITCH_I/V","AIN3_SWITCH_I/V","AIN4_SWITCH_I/V","AIN5_SWITCH_I/V","AIN6_SWITCH_I/V","AIN7_SWITCH_I/V","AIN8_SWITCH_I/V","IN6","IN7","IN8","DIS_24VOUTPUTS","DIS_24VOUT_OVERTEMP","5V_EXT_FAULT","5V_EXT_EN","NC";
gpio-controller;
#gpio-cells = <0x02>;
status = "okay";

2
dtoverlay/mcp23017_0x21_zeroplc.dts
View File

@@ -92,7 +92,7 @@
mcp@20 {
compatible = "microchip,mcp23017";
reg = <0x21>;
gpio-line-names = "IN_FAULT","BUS_IO1","BUS_IO2","TFT_BACKLIGHT","NC","NC","NC","NC","NC","NC","NC","NC","OUT_DIAG","TFT_RST","TFT_RS","TOUCHT_RST";
gpio-line-names = "IN_FAULT","BUS_IO1","BUS_IO2","TFT_BACKLIGHT","FAN_ENABLE","5VEXT_INTERFACES_ENABLE","PI_BOOT_LED","RS485_120R","NC","NC","NC","NC","OUT_DIAG","TFT_RST","TFT_RS","TOUCHT_RST";
gpio-controller;
#gpio-cells = <0x02>;
status = "okay";

2
install.sh
View File

@@ -48,6 +48,8 @@ cat <<EOF >> /boot/firmware/config.txt
dtparam=i2c_arm=on
dtoverlay=i2c-gpio,bus=3,i2c_gpio_sda=23,i2c_gpio_scl=24
dtoverlay=gpio-shutdown,gpio_pin=25,active_low=1,gpio_pull=up
dtoverlay=w1-gpio
enable_uart=1